Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1214-1HG40-4XB0 PLC CPU

Data sheet 6AG1214-1HG40-4XB0

SIPLUS S7-1200 CPU 1214C DC/DC/relay for medial exposure with

conformal coating based on 6ES7214-1HG40-0XB0 . compact CPU,

DC/DC/relay, onboard I/O: 14 DI 24 V DC 10 DO relay 2 A 2 AI 0-10

V DC, Power supply: DC 20.4-28.8V DC, Program/data memory 100

General information

Product type designation CPU 1214C DC/DC/relay

Firmware version V4.1

Engineering with

● Programming package

STEP 7 V13 SP1 or higher

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

Current consumption (rated value) 500mA; CPU only

Current consumption, max. 1500mA; CPU with all expansion modules

Inrush current, max. 12A; at 28.8 V

6AG1214-1HG40-4XB0 Subject to change without notice

Page 1/

Summary of content (8 pages)

PAGE 1
Data sheet 6AG1214-1HG40-4XB0 SIPLUS S7-1200 CPU 1214C DC/DC/relay for medial exposure with conformal coating based on 6ES7214-1HG40-0XB0 . compact CPU, DC/DC/relay, onboard I/O: 14 DI 24 V DC 10 DO relay 2 A 2 AI 0-10 V DC, Power supply: DC 20.4-28.8V DC, Program/data memory 100 KB General information Product type designation CPU 1214C DC/DC/relay Firmware version V4.
PAGE 2
Output current for backplane bus (5 V DC), max. 1 600 mA; Max. 5 V DC for SM and CM Encoder supply 24 V encoder supply ● 24 V L+ minus 4 V DC min. Power loss Power loss, typ. 12 W Memory Work memory ● integrated 100 kbyte ● expandable No Load memory ● integrated 4 Mbyte ● Plug-in (SIMATIC Memory Card), max. with SIMATIC memory card Backup ● present Yes; maintenance-free ● without battery Yes CPU processing times for bit operations, typ. 0.085 µs; / instruction for word operations, typ.
PAGE 3
Clock ● Hardware clock (real-time) Yes ● Backup time 480 h; Typical ● Deviation per day, max. 60 s/month at 25 °C Digital inputs Number of digital inputs ● of which inputs usable for technological functions Source/sink input 14; Integrated 6; HSC (High Speed Counting) Yes Number of simultaneously controllable inputs all mounting positions — up to 40 °C, max. 14 Input voltage ● Rated value (DC) 24 V ● for signal "0" 5 V DC at 1 mA ● for signal "1" 15 V DC at 2.
PAGE 4
● Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000 Cable length ● shielded, max. 500 m ● unshielded, max. 150 m Analog inputs Number of analog inputs 2 Input ranges ● Voltage Yes Input ranges (rated values), voltages ● 0 to +10 V Yes ● Input resistance (0 to 10 V) ≥100k ohms Cable length ● shielded, max.
PAGE 5
— Shared device Yes — Number of IO Controllers with shared device, max.
PAGE 6
Number of position-controlled positioning axes, max.
PAGE 7
● max. 60 °C; Number of simultaneously activated inputs or outputs 7 or 5 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 14 or 10 at 55 °C horizontal or 45 °C vertical ● At cold restart, min. 0 °C Ambient temperature during storage/transportation ● min. -40 °C ● max. 70 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 2 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ...
PAGE 8
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.