Data Sheet for Product

ManualsBrandsSiemens ManualsSensors Pressure590 Series Differential Pressure Sensor Technical Instructions

Document No. 588-203 June 2009

Predator Controller

Hardware Family

Figure1: Predator Controller Only. Figure 2: Predator VAV Actuator.

Description

The LONMARK

certified configurable Predator Controller provides direct digital control of a variety of

mechanical equipment ranging from zone level control of VAV/CV, Heat Pump, Unit Ventilator, and Fan Coil

Units to air distribution units to mechanical plants to spare point pick up of miscellaneous zone equipment.

The Predator Controller is designed to reside on a LONWORKS network, providing seamless interaction with

all LONMARK products. The Predator Controller offers cost-effective flexibility that provides various

input/output configurations; each designed to meet the individual equipment application requirements.

Features

Conforms to and is certified to the LONMARK interoperability guidelines, enabling information

sharing with other LONMARK products.

LONMARK-compliant with space comfort functional profile number 8505 for zone level control and

the Discharge Air Controller Functional Profile 8610 for air distribution control.

Field-selectable parameters allow entry and updating of setpoint and control parameters via the

TALON Interface.

Two packaged designs to meet unique market needs, consisting of:

o Predator Controller Only two-piece series, consisting of a plenum-rated NEMA 1

Enclosure Cover with Embedded Controller Board and a separate Wiring Base,

protects electronic parts from potential damage during installation.

o Integral shaft-mount of the one-piece Predator VAV Actuator further reduces

installation and setup time.

Variety of platform configurations for application flexibility.

Advanced PID control minimizes offset and maintains tighter setpoint control.

Return to service from power failure without operator intervention.

Summary of content (13 pages)

PAGE 1
Predator Controller Hardware Family Figure1: Predator Controller Only. Figure 2: Predator VAV Actuator. Description The LONMARK certified configurable Predator Controller provides direct digital control of a variety of mechanical equipment ranging from zone level control of VAV/CV, Heat Pump, Unit Ventilator, and Fan Coil Units to air distribution units to mechanical plants to spare point pick up of miscellaneous zone equipment.
PAGE 2
Applications The Predator Controllers can be configured to control a variety of equipment Predator Type Control Functionality  VAV/CV cooling only VAV/CV Single Duct  VAV/CV heating only  VAV/CV with hot water reheat  VAV/CV with electric reheat (up to three stages)  VAV cooling/heating switchover  VAV series or parallel fan-powered with hot water reheat  VAV series or parallel fan-powered with electric reheat (up to three stages)  Cold duct and hot duct VAV/CV Dual Duct  Dual cold duct  Dual hot
PAGE 3
Applications, Continued Predator Type Miscellaneous Equipment Four stage DX AHU VAV Air Handling Unit Three Zone Control Control Functionality The Four Loop Controller contains 4 internally cascaded PID loops and programming logic to perform control of a variety of equipment, such as:  Hot water converters  Simple heating and cooling plants  Two VAV rooms  IAQ routines  Humidity control  Three sensor input loops  VFD control  Fan tracking  Heat recovery units  Emergency generators  Up to four
PAGE 4
The Predator Controller Only Enclosure Cover with Embedded Controller Board is available in the following configurations: 6 Inputs, 8 Digital Outputs, 3 Analog Outputs, 1 Room Sensor, (1 DPS for VAV/CV only) ® The Controller Board communicates to all LONMARK devices via a Neuron -chip. The controllers are shipped with pre-loaded applications, reducing engineering start-up time. The control application is stored in Flash memory.
PAGE 5
Controller Specifications Processor Type Neuron 3150 Processor Clock Speed 10 MHz - Neuron Network Communication Speed TP/XF-10 (78.8K bps) Memory Size 49 K Flash Memory 10 K SRAM Voltage Requirements 24 Vac @ 50/60 Hz Power Consumption 5 VA plus loads Ambient Operating Environment +32 F to +122 F (0 C to +50 C) 5 to 95% RH (Non-condensing) Agency Listings UL/CUL 916 PAZX/PAZX7 (Enclosed Energy Management) LONMARK 3.
PAGE 6
Wiring Diagrams Full Point Wiring Base DO 3 DO 4 10K Thermistor or DI Network connection Room Sensor Connection via RJ-11 E HC (E) Earth (H) Line (C) Neutral Power Wiring Predator VAV Actuator Wiring Page 6 of 13
PAGE 7
3 DO 2 AI • 10K Thermistor • Voltage input • Either of which can be a DI LON port Room Sensor Connection Power Wiring: (E) Earth (H) Line (C) Neutral Predator VAV Actuator Wiring Wiring Recommendations: Input/AO DO Power LONW ORKS Network 20 to 22 AWG 18 to 22 AWG 16 to 18 AWG 22 AWG Level 4 Transformer Requirements and Recommended Voltages Type Class 2, 24 Vac, 50/60 Hz Optional Accessories Predator Room Temperature Sensors The Predator Room Temperature Sensors offer a wide range of features and func
PAGE 8
Differential Pressure Sensors The self contained-remote-mount Siemens Differential Pressure Sensors (DPS) may be used as the primary input for control and as a cost effective solution to control VAV Dual Duct zones. The 590 Series differential pressure sensors are 24 Vac powered and provides a 0-10 Volt control signal with a 1% full-scale accuracy. The standard control signal enables these devices to be used with almost any control or energy management system.
PAGE 9
Predator Controller Only, Continued Description Product Number Predator 10K Full Point HP Controller Rev.
PAGE 10
Predator Controller Only, Continued Description Product Number Predator 10K Four Stage SZ AHU Controller 6IN 8DO 3AO 6 IN (2) 10 K Thermistor / (4) 0-10 Vdc or Dry Contact 8 DO 24 Vac, 12VA, Triac 3 AO 0-10 Vdc 1 RS 10K Thermistor Room Sensor 588-513 Predator 10K Single Duct VAV QVM Controller 6I 8DO 3AO 6 IN (2) 10 K Thermistor / (3) 0-10 Vdc or Dry Contact 8 DO 24 Vac, 12VA, Triac 3 AO 0-10 Vdc 1 RS 10K Thermistor Room Sensor 588-526 Predator 10K Dual Duct VAV QVM Controller 6I 8DO 3AO 6 IN (2) 10 K
PAGE 11
Predator VAV Actuator Predator 10K GDE VAV Actuator 2301 with CO2 2 IN (1) 10 K Thermistor / (1) 0-10 Vdc (Either can be Dry Contact but not both at the same time) 3 DO 24 Vac, 12VA, Triac (non-powered enables hot/neutral field wiring) 1 DPS 0 to 2 inch Differential Pressure Sensor 1 RS 10K Thermistor Room Sensor 1 Siemens GDE (44 lb-in) Actuator 588-524 Predator 10K GDE VAV Actuator 2301 with SAT 2 IN (1) 10 K Thermistor / (1) 0-10 Vdc (Either can be Dry Contact but not both at the same time) 3 DO 24 Vac
PAGE 12
Setpoint, Bypass and Temperature Display 587-557B Accessories, continued Description Product Number 10 K Thermistor Sensors Duct Temperature Sensor, point, 10 K NTC, 4” probe 587-691 Duct Temperature Sensor, averaging, 10 K NTC, 24” flex 587-694 Pipe Temperature Sensor, immersion well, 10 K NTC, with 2.5 s.s.
PAGE 13
TALON Architecture Notice: Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. Credits: Raptor, Predator, and TALON are trademarks of Siemens Industry, Inc. Other products and company names herein may be the trademarks of their respective owners. Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Parkway Buffalo Grove, IL 60089-4513 Phone 847-215-1000 www.staefa.