User's Manual
Shure Incorporated
20/51
•
•
•
•
•
•
•
•
1.
2.
3.
Home Screen: Press the ▲▼ arrows at the home menu to display one of the following screens:
Editing Receiver Channel Name
To edit a receiver channel name, choose EDIT NAME from the menu.
Turn the control wheel to edit a highlighted character
Press the control wheel to advance to the next character
Press ENTER to save changes
Note: The channel name is transferred to a transmitter during a sync.
Setting Regional TV Format
To ensure accurate display of TV channel information, set the TV FORMAT to match the TV channel bandwidth in the region
where the receiver is operating. TV bandwidth varies globally, so check local regulations to determine the regional TV band
width.
The following TV FORMAT options are available:
6 MHz
7 MHz
8 MHz
6 MHz JAPAN
NO TV (use to turn off TV channel display or in regions where TV channels are not applicable)
To set the TV FORMAT:
Menu: DEVICE UTILITIES > ADVANCED RF > TV FORMAT
Use the control wheel to select a TV FORMAT option.
Press ENTER to save.
Locking Controls and Settings
Use the LOCK feature to prevent accidental or unauthorized changes to the hardware. Attempting to access a locked feature
will display the following message:
Receiver
Menu path: UTILITIES > LOCK
MENU: All menu paths are inaccessible. To unlock, press the EXIT button, turn the control wheel to select UNLOCKED and
press ENTER to save.
GAIN: Gain adjustment is locked
POWER: Power switch is disabled
SCAN: Cannot perform a group scan