User Manual

Shure Incorporated
23/70
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
DISPLAY
CONTRAST
BRIGHTNESS: LOW/MEDIUM/HIGH
NETWORK
CONFIGURATION: SWITCHED/REDUNDANT AUDIO/SPLIT
SHURE CONTROL: DEVICE ID, Network Mode, Set IP and Subnet values for Ethernet network
DANTE: DANTE DEVICE ID, AUDIO & CNTRL, REDUNDANT AUDIO, Set IP, Subnet, Gateway and Yamaha values for
Dante network, DANTE DEVICE LOCK, DDM
Note: Additional information can be accessed from the selected networking option.
TX FW UPDATE
IR DOWNLOAD, Tx Firmware Version
SYSTEM RESET
RESTORE: Default Settings, Presets
SAVE: Create New Preset
DELETE: Delete Preset
VERSION
Model
Band
S/N (serial number)
Ver
Mcu
FPGA
Boot
DANTE VERSIONS
REV
FW
HW
BOOT
USER
CAP
Transmitter IR Presets
Use the IR PRESETS receiver menu to quickly configure transmitter settings from the receiver screen. When a sync is per
formed between the receiver and transmitter, the IR PRESETs automatically configure the transmitter. Each parameter has the
default value KEEP, which leaves that setting unaffected by a sync.
Feature Setting
BP PAD +0 dB, -12 dB
™