User's Manual
Table Of Contents
- Table of Contents
- SLX-D Wireless System
- IMPORTANT SAFETY INSTRUCTIONS
- WARNING
- Important Product Information
- Overview
- Set Up the Receiver
- Wearing the Bodypack Transmitter
- Hardware Interface
- Batteries and Chargers
- Sound Check and Gain Adjustment
- Sound Check and Gain Adjustment
- System Set Up
- Radio Frequency (RF) Settings
- Networking
- Firmware Updates
- Firmware Updates
- Mount the SLX-D Receiver in a Rack
- Accessories
- Specifications
- System
- RF
- RF Carrier Frequency Range
- Working Range
- RF Tuning Step Size
- Image Rejection
- RF Sensitivity
- Audio
- Latency
- Audio Frequency Response
- Audio Dynamic Range
- Total Harmonic Distortion
- System Audio Polarity
- Mic Offset Range
- Temperature Range
- Operating Temperature Range
- Storage Temperature Range
- SLXD4 / SLXD4D
- Dimensions
- Weight
- Housing
- Power Requirements
- RF Input
- Spurious Rejection
- Connector Type
- Impedance
- Phantom Power Protection
- Audio Output
- Gain Adjustment Range
- Configuration
- Impedance
- Full Scale Output
- Mic/Line Switch
- Networking
- Network Interface
- Network Addressing Capability
- Maximum Cable Length
- SLXD1
- Battery Type
- Dimensions
- Weight
- Housing
- Audio Input
- Connector
- Configuration
- Impedance
- Maximum Input Level
- Preamplifier Equivalent Input Noise (EIN)
- RF Output
- Antenna Type
- Occupied Bandwidth
- Modulation Type
- Power
- SLXD2
- Battery Type
- Dimensions
- Weight
- Housing
- Audio Input
- Configuration
- Maximum Input Level
- RF Output
- Antenna Type
- Occupied Bandwidth
- Modulation Type
- Power
- SB903
- Charge Voltage
- Charge Current
- Nominal Voltage
- Nominal Capacity
- Housing
- Charging Temperature Range
- Dimensions
- Weight
- SBC10-903
- Battery Charger
- DC Input Voltage Range
- Charge Current
- Charge Time
- Charge Voltage
- Operating Temperature Range
- Dimensions
- Weight
- Housing
- Power Supply
- Input Voltage Range
- Operating Frequency
- Maximum Input Power
- Output Voltage
- Maximum Output Power
- Operating Temperature Range
- SBC203
- Charge Current
- Charge Time
- External Power Supply
- Power Requirements
- Charging Temperature Range for Battery
- Dimensions
- Weight
- Housing
- Power Supply
- Input Voltage Range
- Operating Frequency
- Maximum Input Power
- Output Voltage
- Maximum Output Power
- Operating Temperature Range
- Receiver Output Connectors
- Transmitter Input
- Frequency Range and Transmitter Output Power
- Frequencies for European Countries
- Certifications
Shure Incorporated
33/43
Configuration
1/4" (6.35 mm) Balanced (Tip = audio +, Ring = audio -, Sleeve = ground)
XLR Balanced (1=ground,2=audio+,3=audio−)
Impedance
1/4" (6.35 mm) 1.3kΩ (670Ω Unbalanced)
XLR (line) 400Ω (200Ω Unbalanced)
XLR (mic) 150Ω
Full Scale Output
1/4" (6.35 mm) +15dBV differentially (+9dBV single)
XLR LINE setting= +15 dBV, MIC setting= -15 dBV
Mic/Line Switch
30 dB pad
Networking
Network Interface
Single Port Ethernet 10/100 Mbps
Network Addressing Capability
DHCP or Manual IP address
Maximum Cable Length
100m (328ft)
SLXD1
Battery Type
Rechargeable Li-Ion or 1.5V AA batteries
Dimensions
98 x 68 x 25.5mm (3.86 x 2.68 x 1 in.), H x W x D
Weight
89g
Housing
PC/ABS
Audio Input
Connector
4-Pin male mini connector (TA4M)