User Manual

Shure Incorporated
35/60
1.
2.
3.
4.
5.
6.
7.
1.
2.
◦
◦
3.
4.
5.
Downloading and Updating Firmware
A free Shure Update Utility tool is available by visiting www.shure.com. The Shure Update Utility is also bundled with
Shure Wireless Workbench software.
Refer to the help instructions to use the Shure Update Utility.
Updating the Receiver
CAUTION! Ensure that receiver power and network connections are maintained during a firmware update. Do not
turn off the receiver until the update is complete.
Connect the receiver and computer to the same network.
Open the Shure Update Utility.
Click on the firmware tab to find available updates.
Use the Import button if manually importing firmware files.
Click the Update Device tab and check the Version to install box next to each device.
Click Send Updates to load the firmware to the networked devices.
When the download is complete, the receiver will reboot with the updated firmware installed.
Updating the Transmitter
To update transmitters, download firmware to the receiver. You can download firmware for handheld and bodypack
transmitters, or for boundary and gooseneck transmitters. The receiver sends firmware to the transmitter using the
IR Sync window.
Press menu while holding the enter button to access the advanced menu. Use the menu button to navigate to
the update menu.
The receiver displays the type of transmitter firmware it has available. The receiver holds one type of firmware
at a time.
HH BP = handheld or bodypack firmware
BN GN = gooseneck or boundary firmware
Press enter to start the update.
When the red IR LED flashes, align the receiver and transmitter IR sync ports. The red LED will remain
illuminated to indicate correct alignment and the download will automatically start.
Maintain alignment during the update and monitor download progress (0 to 100%) on the receiver screen.