User Manual

Shure Incorporated
11/60
•
•
•
•
⑨ IR Window Align with the transmitter IR window during an IR sync to automatically program
transmitters.
⑩ Sync LED Blinking: IR sync mode is enabled
On: Receiver and transmitter aligned for IR sync
⑪ Power Cord Strain
Relief
Secures power cord.
⑫ Power Supply Jack Connection point for DC power supply.
⑬ Ethernet Port For network connection.
Amber LED (network speed):
off = 10 Mbps, on = 100 Mbps
Green LED (network status):
off = no network link, on = network link active
flashing = rate corresponds to traffic volume
⑭ Receiver Reset Press to restore receiver default settings.
⑮ Antenna Connectors BNC connector for receiver antennas
⑯ Mic/Line Switch Sets output level to microphone or line.
⑰ XLR Audio Output Balanced (1: ground, 2: audio +, 3: audio - )
⑱ 1/4" Instrument/
Auxiliary Output
Impedance Balanced (Tip: audio, Ring: no audio, Sleeve: ground)