User's Manual

Shure Incorporated
17/25
Switch Down (default) Up
4 Full Frequency Range
Low Cut Filter (attenuates 6 dB per octave be
low 150 Hz)
5 LED Steady LED Flashes
Local Mute Control
The microphone ships configured for local (manual) mute control (DIP Switch 3 down). In this mode, the PUSH button on the
microphone mutes the audio signal at the microphone. Audio is not sent to the audio outputs when muted.
In this configuration, the LED color reflects the microphone state, as controlled by the user with the PUSH button.
Microphone Status
MX405, 410, 415
MX405R, 410R, 415R
Active Green Red
Muted Red Off/flashing
Button Configuration
For local mute control operation, use DIP Switches 1 and 2 to configure the button behavior.
Button Behavior SWITCH OUT Logic Signal DIP Switch Setting
Momentary: push-to-mute (as shipped).
When pushed, SWITCH OUT (red wire) falls
to 0 V. When released, SWITCH OUT re
turns to +5 V.
Momentary: push-to-talk