Owner's Manual
Shure Incorporated
19/36
Status displays the MOTIV device or whether audio is received from the builtin microphone. Red flashing dot indi
cates that recording is in progress.
② Settings Status
Displays the icons for currently enabled advanced settings.
③ Microphone Gain
Adjust the volume of the sound source. Keep levels in the target range (indicated by the shaded region of the input
meter).
④ Timeline Display
Displays the waveform of the sound while recording.
• Stereo Recording: A complete waveform is shown.
• Mono Recording: Half of the waveform is shown.
⑤ Record Time Remaining
⑥ Bit Depth and Sample Rate
Use the dropdown menu to select your bit depth and sample rate. See "Bit Depth and Sample Rate" for more in
formation.
⑦ Track Information
Displays the name, file type, and size of the current recording.
⑧ Record Control Bar
The Marker button, a Record/Pause button, and the Done check mark button.
Note: The maximum file size for a recording is 2GB, approximately 2 hours of record time. This limitation maxi
mizes app performance. Continuous recording for more than 2 hours will generate a second file.
Bit Depth and Sample Rate
Find the Bit Depth and Sample Rate settings in the drop-down menu on the right side of the record window. Select
a lower sample rate when it is useful to have a smaller file, for example, when recording speech or a podcast for
download. Select a higher sample rate for music and dynamic recordings.
If no alternate is selected, MOTIV will record audio at 24/48 kHz. However, the following bit depths and sample
rates are supported.
Bit Depth Sampling Rate
24 48 kHz
24 44.1 kHz
_____
I
____
_