Lite Power Classic ORDERCODE 50319
Congratulations! You have bought a great, innovative product from Showtec. The Showtec Lite Power Classic brings excitement to any venue. Whether you want simple plug-&-play action or a sophisticated DMX show, this product provides the effect you need. You can rely on Showtec, for more excellent lighting products. We design and manufacture professional light equipment for the entertainment industry. New products are being launched regularly. We work hard to keep you, our customer, satisfied.
Showtec Showtec Lite Power Classic™ Product Guide Warning.................................................................................…...……………..…………………………….………..… Safety-instructions……………………………………………………………………………………………………….. Operating Determinations.……………………………………………………………………………………………. Return Procedure……………………………………………………………………………...................................... Claims……………………………………………………………………………......................................................... 2 2 3 4 4 Description.....................
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Unpacking Instructions Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure that all parts are present, and have been received in good condition. Notify the dealer immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials.
Do not open the device and do not modify the device. Never leave any cables lying around. Do not insert objects into air vents. Do not connect this device to a dimmerpack. Do not switch the device on and off in short intervals, as this would reduce the device’s life. Do not touch the device’s housing bare-handed during its operation (housing becomes hot). Do not shake the device. Avoid brute force when installing or operating the device. Only use device indoor, avoid contact with water or other liquids.
Connection with the mains Connect the device to the mains with the power-plug. Always pay attention, that the right color cable is connected to the right place.
Description of the device Features The Lite Power Classic is a four channel multi-function chasing powerpack. • 4-Channel-DMX/MIDI-Pack • Load of 5A per channel with a maximum of 16A total. • Fade time control • 4 individual Faders and 1 Master-Fader • 4 Flash-Buttons, Full-On & Standby (Priority) • 42 pre-set Chases with controllable Chase-speed • 7 Modes: Hold Dimmer / Hold Sound / Prog Sound / Prog Speed / Auto Speed /Auto Sound / Memory.
13) Stand-by Button & LED: Press to pause all output. 14) Master Dimmer Control: This LED indicates the operating mode being executed. 15) Full on Button: Press to activate FULL ON function of whole output. 16) Audio Level Control: This control adjusts the sensitivity of music rhythms detected by the built-in microphone or line in. 17) Tap Sync Button: This button is effective only in Prog Speed and Auto Speed. It is used to define chasing speed.
50319IEC Lite-Power (mit Bulgin + IEC connectors) 1) AC Input:; Plug in appropriate power supply. 2) Audio Input: Line in 100mV-1Vpp 3) Channel Fuse: F6.3A 250V 5x20mm. 4) Channel Output: 2A /CH., 8A /Total (CE) 5) Bulgin Output Installation Remove all packing materials from the Lite Power Classic. Check that all foam and plastic padding is removed. Screw the equipment into a 19" rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
Auto Sound Memory PR mode ST mode AS mode AP mode The corresponding LED lights. You can operate as described by Prog Sound. However, in this mode, each program will be executed 4 times continuously and then go to the next program. Up to 32 steps can be memorized. In this mode, you can select the desired operating mode Program / Manual / Auto Sound / Auto Speed corresponding to digit indication PR, ST, AS and AP. Press and hold Prog Select (11) and press Stand-by (13) once.
Maintenance The Showtec Lite Power Classic requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents. Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Product Specification Model: Showtec Lite Power Classic Power input : AC 100V-240V, 50/60Hz, 40W DMX-Output: 3-pin female XLR Audio Input: 100 mV~1 Vpp Fuse: F1.5A 250V 5x20 mm Dimensions : 480 x 132 x 126 mm (LxWxH) Weight : 4,8 kg Design and product specifications are subject to change without prior notice. Website: www.Showtec.info Email: service@highlite.