Owner`s manual

Micro Swirl Jets

Water flow through these jets can be controlled by turning the outside face of the jet. Turning the

trim ring clockwise will reduce the water flow from the jet and turning it counterclockwise will increase

the water flow.

Soft Spray Jet

This grouping of jets is designed to give a soft massage over a larger area of your back. These are

also used as foot jets in the footwell of your hot tub.

Hot Tub Light

Red and blue colored light lenses are included with your hot tub. To install or

remove lenses simply push them on or pull them off from the light on the inside of

the hot tub.

To replace the hot tub light bulb, turn off all power to the equipment module. Locate the rear

of the hot tub light assembly and unscrew the lamp holder from the clear lens body. Pull the

bulb from the socket and replace by reversing the above steps. CAUTION: The replacement

bulb must be the same rating as the factory installed bulb (standard automotive type #912).