Product Manual

ASSEMBLY
-9-
The following is a description of the
components shipped with the SHOP FOX
®
W1709. Lay the components out in a similar
fashion to those in Figure 6. This will help in
identification before beginning assembly.
Should any part be missing, examine the
packaging carefully. If any parts are missing,
find the part number in the back of this manual
and call Woodstock International, Inc. at 360-
734-3482 or e-mail:
[e-mail]
.
Combination Wrench 8 x 10mm ................(1)
Combination Wrench 12 x 14mm ..............(1)
Combination Wrench 17 x 10mm ..............(1)
Phillips Screwdriver ..............................(1)
Standard Screwdriver ............................(1)
Hex Wrench Set (10-Piece 1.5-10mm) ........(1)
Square-Key Door Handle ........................(2)
Sanding Belt ........................................(2)
4-Amp Fuse Bag (Located Inside of Power Box)(2)
Sander (Not Shown) ..............................(1)
Tool Box (Not Shown) ............................(1)
Dust Port (Not Shown)............................(1)
Dust Port Adapter (Not Shown) ................(1)
Ceramic Wear Rods (Not Shown) ..............(2)
Item Qty.
Figure 6. Parts shipped with the sander.
Unpacking
Box Contents
The Model W1709 has been carefully packaged
for safe transporting. If you notice the machine
has been damaged, please contact Woodstock
International Service and Support at 1-360-734-
3482 or send e-mail to:
[e-mail]
.
ASSEMBLY
READ and understand this
entire instruction manual
before performing any
operations with your
machine. Personal injury
may occur if safety and
operational information is
not understood and
followed.
The Model W1709 is a
heavy machine at 1,870
lbs. Use power or
hydraulic equipment to
avoid serious personal
injury or death.