USER MANUAL L9C
INTRODUCTION Hello World Thank you for purchasing the Apollo City. The electric scooter industry is still young and it takes forward-thinking customers like yourself to advance it. We hope you enjoy your new scooter as much as we loved developing it. Model: L9C FCC ID: 2AZ3Z-ZSF4141 Contents WEBSITE: apolloscooters.co (US) apolloscooters.ca (CAD) apolloscooters.com (GLOBAL) HELP CENTER: apolloscooters.co/support This device complies with part 15 of the FCC Rules.
UNBOXING Model: L9C FCC ID: 2AZ3Z-ZSF9 IC: 27323-ZSF9 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Intro Unbox your scooter Setting up your scooter right is the single most important step to your safety. Open the box using the box cutter and fold open the top.
Prepare for assembly Attach handlebar 1 Unfolding 2 1 2 The first step is to unfold your Apollo City. To do so, ensure scooter the hook is not clipped into the rear foot rest. If it is, push down on the stem and unhook it from the rear foot rest. 1 3 4 Unfold the stem by pulling it to a vertical position. Ensure you do so until the stem is completely vertical. 2 Locate the folding latch and bring it up, locking the stem. The latch will require some force to lock fully upright.
Perform test 1 Locate the power button on and press it for 3 seconds to power on the scooter. You should now be able to see the display powered on. Keep the scooter elevated on the stool or bench, as the testing will involve spinning both wheels. The scooter should be in Kick to Start mode, to begin testing the motors, spin the wheel and then press the throttle. The wheels should begin to spin normally. You may notice either motor emitting a noise at low speeds, this is normal.
OPERATION WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding.
How to brake scooter The Apollo City has two different types of brakes. The regen brake which allows you to capture energy from brakeing and recharge your battery, and the dual drum brake. The regen brake will allow you to have a smoother and more efficient stop. To use it, Throttle BRAKING FOR THE FIRST TIME: Before taking your scooter for a ride, we recommend for you to adjust the regen brake in your Apollo App. Refer to the App section in this manual for more information.
Handlebar features 1 1 Display 2 Accelerator throttle (right-hand side of the handlebar) 3 Accelerator throttle- Power button-Gear change 4 Accelerator throttle- right turning signal 6 DISPLAY WARNING: 3 5 2 4 E-brake throttle- Mode button-light ON-Off 7 Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death.
SETTINGS BATTERY INFO App You can manage your settings through the Apollo App. scooter APP. The Apollo App is available for iOS and Android. To download it, visit our website - Apolloscooters.co - or look for it in your APP store as Apollo Scooters. You can also download it using the following QR code: WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death.
GENERAL SAFETY WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding.
MAINTENANCE WARNING: Failure to properly maintain your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. A tune up consists of the following steps: t t t t t 20 Tire pressure check Bearing lubrication Suspension lubrication Brake adjustment Screw tightening The next maintenance step is to lubricate the bearings. Your bearings are the connection between the rotating wheels of your scooter and the non-rotating frame that holds them stable.
Drum Brake Adjustment Note: this section describes a basic adjusment to your brakes. For an in-depth brake adjustment tutorial, please visit the help centre at apolloscooters.co/support . Your brakes are an important component of your scooter. If you feel your brakes are not performing as well as they should, you might want to tighten your brakes. The first point of control of your brakes is your brake handle. Locate the adjustment screw at the connection of the brake line to the brake handle.
TROUBLESHOOTING WARNING: Incorrect assembly, maintenance, or use of your Apollo scooter can cause component or performance failure, loss of control, serious injury, or death. Even if you’re an experienced scooter rider, you must read and understand the entire manual and any documentation provided for subcomponents or accessories before riding.
E4 E5 OVER CURRENT PROTECTION UNDER VOLTAGE PROTECTION OVER VOLTAGE PROTECTION If E4 error is reported continuously, it is considered to be hardware fault of controller. If E5 is reported continuously, check whether the battery voltage is too low (Below 30 Volts). If E6 is reported the battery voltage is too high. Solution 1: Check whether the brake handle wire is connected properly. Solution: Replace with a new battery to test, if the error goes away the battery was the issue.
WARRANTY Warranty Structure Apollo Scooters are covered under a 12-month limited warranty coverage against manufacturing defects. Please read on for further details. Warranty Scope & Eligibility All Apollo Scooters (“scooters”), are covered with a limited warranty against manufacturing defects for a period of one year (12 months), starting on the day the scooter is received by the customer.
Damage During Shipping Apollo offers the option to purchase additional shipping insurance to cover the value of your scooter in transit. Without that shipping insurance, any loss or damage during shipping is at the responsibility of the customer. Apollo can assist with opening a claim against the courier for up to $100. If shipping insurance is purchased and the scooter arrives damaged, Apollo will be able to replace your unit (upon verification from the customer support and engineering teams).
L9C 32 USA CANADA apolloscooters.co apolloscooters.
