Installation Instructions

3
/
4
4. Place mobile phones that need to be recharged.
5. Touch the top back sensing area when removing
Note :
1. This product should be used as required, otherwise it may cause
fire, explosion or other danger.
2. Please use the QC3.0 or PD fast charger, otherwise, it may not be
able to turn on or off automatically ,or not charge or charge slowly.
3. Please use the original data cable. This device has a large input
current and needs to support charging cables for more than 2A.
Otherwise, it may not be able to turn on or off automatically ,or not
charge or charge slowly.
4. Do not attempt to disassemble, shake, or knock off the device.
5. Please touch the top back sensing area when removing (1.5 cm
below the top)
Technical parameters:
Input interface: Type-c
Input power: QC3.0 or PD
Input voltage / current: 5V3A
9V2A