User Manual for T330 Remote Training Collar Please read this manual carefully before use
Contents Safety Instructions ......................................................... 1 Product Introduction ..................................................... 1 What You Get ................................................................... 2 Function and operation description ...................... 3 1.At a glance ........................................................................ 3 2.Receiver Indicator Light Status ...................................... 5 3.Charging ............................
Safety Instructions 1 This product cannot be tested directly on humans, otherwise it will violate local laws. 2 Turn off or remove the receiver before playing with the dog. 3 Please do not wear the receiver on your dog for a long time. 4 Do not place the product near a stove or at high temperatures. 5 Do not open the shell of the product, which will cause the lithium battery disconnect or fire. Product Introduction Thank you for choosing our products.
What You Get COMPONENTS Transmitter 1 Receiver (Including collar) 1 Static stimulation test light 1 Magnetic charging cable 1 Lanyard 1 User manual 1 User Manual for T330 Remote Training Collar Please read this manual carefully before use 2
Function and operation description 1.
Charging Port Contact Point ⑨On/Off Button Indicator Light TPU Adjustable Collar Charging Port 4
① Lanyard Hole Please tie the lanyard here ② Level+/- Button Used to adjust the level of Static Stimulation / Vibrate ③ Display Screen Used to display device status ④ Lock/Unlock Switch to Lock or Unlock ⑤ Tone Button ⑥ Vibration Button ⑦ Static Stimulation Button Press to start the static stimulation function ⑧ Channel Selection Button Used to switch other receiver communication channels ⑨ On/Off Button Press to turn on/off the receiver Press to start the tone function Press to sta
3.Charging Tips: Please fully charge before use! The indicator flashes red when charging It takes about 2 hours for full charging The indicator stays green after full charging DC5V1A DC5V1A 4.Turn on/off: Transmitter and Receiver The startup indicator color is green. Slide down to lock the transmitter Slide up to unlock the transmitter Long press 2 seconds to turn on/off The indicator color is red when the device is powered off.
5.Function introduction ❶Tone Tone ① Button Transmitter delivers a beep tone with nonadjustable volume to the receiver collar. The indicator color shows green. ② ..................... ❷Vibration Press + / - firmly to adjust the vibrate level ① Vibration Button Transmitter delivers a vibrate with adjustable level (level1-16) to the receiver collar.The indicator color shows yellow. ② .....................
❸Static Stimulation Press + / - firmly to adjust the Static Stimulation level Transmitter delivers a static stimulus with adjustable level (level1-16) to the receiver collar. The indicator color shows red. ② .....................
Step 1：Make sure the Transmitter and receiver collar are on paired. Step 2：Please start the static stimulation function and adjust the level to 10. Step 3：Put the test light between two contact points and make sure its interface is touching the contact points. Press the static stimulation button again, if the test light is on which means the static stimulation is on going . ❺Pairing and select the communication channel Tips：The default factory settings of the communication channel is channel .
Step 2：Make sure the receiver is shut down first, and hold on the on/off button for 7 seconds. The green light will flash quickly and enter to the matching state after hearing a beep. The green light flashes quickly and will enters the matching state after hearing a beep. Step 3：Please press the tone or vibration function button within 10 seconds when entering the matching state, and the receiver will beep twice indicating that the matching is successful.
Wearing Method And Precautions 1.Wearing Method Please keep the dog in a comfortable standing position ① and ensure that the receiver is turned off before wearing. Please place the receiver in the middle of the dog's neck and ensure that the direction of the switch button is upward, ② and the contact point is aligned with the dog's throat. Check the tightness of the receiver collar. The wearing standard is that a finger can be held between the collar and the dog's neck.
2.Wearing Precautions Wearing a collar for a long time or too tight will cause the dog's skin to be worn, from redness to pressure sores. This condition is often referred to as bedsore. Please make sure your dog doesn't wear the collar more than 12 hours a day. Please try to readjust the collar position on the pet's neck every 1 to 2 hours. Regularly check the tightness of the collar to prevent excessive pressure.
Questions Analysis Measures Check whether the touch No response means of the key is normal damaged 2.
Questions Analysis The collar strap is wearing too loose 4.
Questions Analysis Wear it for too long time 6.Dog injuries 7.
Questions 8.Product compatibility issues 9.Safety of vibration/shock Analysis Measures The remote and receiver need to match, if buy Buy the same model from another sellers' remote us to pair or receiver, it can not be paired with ours The continuous use of vibration and shock should not exceed 30 seconds.
Questions 12.It is effective at first, but does not work later 13.The product does not work Analysis Measures ① Check whether the device works normally ① Change the levels and readjust the training mode ② Wearing for a long time dog has been fully adapted ② It is recommended not to wear the product when not training Can not turn on it Test after charging Remote & receiver not paired well Repair the remote with receiver 14.
About After-Sales 1.If the product is faulty within 30 days from the purchase date, you need to take a video or picture of the faulty product. After the customer service confirms, the replacement can be sent. And the faulty product must be returned within 7 days after receiving the replacement. 2.If the product is faulty after 30 days, and it is still within the 1-year warranty period from the purchase date, the consumer will be required to return the product and pay the freight.
Compliance This symbol means that the product has been CE certified, and any product with CE mark is proved in compliance with the local regulations of EEAs. This symbol means that the electromagnetic interference of the equipment is lower than the limit approved by the Federal Communications Commission. Disposal of package: The package shall be disposed by type.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
