Instructions for Use Automatic Recharge This product conforms to European ERP energy consumption standard When Cleaning is completed or the battery is too low,the robot will automatically start finding the charging base to charge itself. Pls keep the charging base in power,otherwise the machine will not be able to find the charging base. Charging instruction 01. For the very first operation, please let the robot run out of power. 02. Please charge the robot for 12 hours for the first time of operation.
Instructions for Use Switching Modes Power on 01. Make sure the power switch on the side of the robot is turned on. 02.Press the Control button“ ” or the Cleaning mode on the remote controller to run the robot. Pause The pause function is to switch the robot from the operating mode to the selected mode, and the robot can be paused by the following operations: 01.Press the Control button on the robot to pause the robot. 02.Press the power on/off button on the remote controller to pause the robot.
Instructions for Use Use of Water Tank When charging, please remove the water tank to avoid danger How to add water Open the tank sealing cap, fill it with enough water and slowly inject water When charging, please remove the water tank to avoid danger How to fix the microfiber mop? Seal the tank sealing cap,then fix the microfiber mop to the velcro on the bottom of the water tank 20
Instructions for Use When charging, please remove the water tank to avoid danger How to install the water tank? Press the release button on the dust box to remove it then install the water tank Schedule Cleaning You can set the current local time on your robot by pressing the Clock Setting 21
Instructions for Use ☆ Once the power switch is turned off, all schedule will be canceled. ☆ Once the schedule setting is succeeded,the robot will start working at the scheduled time everyday Press the"Schedule Setting" button to set the scheduled cleaning time for the robot.(e.g. Setting 6:30 am to the robot, the robot will start cleaning at 6:30am every day at the standby mode.) ☆ At the Schedule Setting mode,follow the voice prompts to confirm all your operations. 1.
Instructions for Use Cleaning Modes Plan Cleaning (S shape Cleaning) The robot will perform the plan cleaning in S shape according to the room environment.
Instructions for Use 断点续扫 扫地机 当前位置 扫地机搬 动后位置 导航到断点 导航回充 Relocation During the cleaning process, move the robot after the suspension, when restart, the robot will seek relocation Resume During cleaning process, the robot will back to charging base automatically After fully charged, the robot will back to the place where it stopped before and continuing cleaning Laser Relocation In a single room, when the robot moves for a few rounds(at least one round), the laser module will establish the map of curre
Product Maintenance 5.1 Side brush cleaning and replacement Check the side brush condition from time to time to see if it has been damaged or wrapped with foreign objects. Clean the side brush with a cleaning tool or a rag. When the side brush is damaged and cannot be used, please replace it in time, L and R side brush should be corresponding. 5.
Product Maintenance Open dust bin cover, and dump garbage Remove the primary filter 26
Product Maintenance Open the high-efficient filter cover, and remove the high-efficient filter and filter sponge. It is not recommended to wash the high-efficient filter with water. Please put off the debris carefully. Wash the dust box and pre-filter.
Product Maintenance 1. Dry the dust bxo and filter components. Keep them dry to ensure a longer service. 2. After the pre-filter is used for 15-30 days, it should be washed once. 3. The maximum service life of the high-efficient filter is 3 months. 1. Reinstall the pre-filter and high-efficient filter in the dust box. 2. Before installing the filter, make sure that the high-efficient filter and the pre-filter are dry. 3. Do not expose the high-efficient filter and the pre-filter to sunlight.
Product Maintenance Cover the dust box and fix it into the main body. 5.3 Maintenance of Water Tank Press the release button to take out the water tank.
Product Maintenance Reomve the mop Wash and dry th 30
Product Maintenance Pour out the rest of water from the water tank Clean the water tank and dry 31
Product Maintenance 5.4 Maintenance of Rolling Brush Components Open the rolling brush components Remove the rolling brush and clean off all debris and hair.
Product Maintenance 5.5 Maintenance of Other Components lectrode slice ensor Use the cleaning tools or a dry soft cloth to periodically clean the electrode slice of robot chassis and the sensor window.
Common Faults 6.1 Faults Description Faults The robot can not be charged. The robot is stuck during work. The robot goes back to recharge without finishing the cleaning work. Possible Reasons The electrodes between the main body and the charging base are not contacted properly. Make sure that the electrodes between the main body and the charging base are properly contacted. The charging base is switched off while the robot is switched on,which leads to the loss of power.
Common Faults 6.
FCC warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
