User's Manual

Wireless N150/N301 Easy Setup Router

1.2 Physical installation

1. Connect one end of the included power adapter to the device and plug the

other end into a wall outlet nearby.(Using a power adapter with a different

voltage rating than the one included with the device will cause damage to the

device)

2. Connect one of the LAN ports on the Device to the NIC port on your PC

using an Ethernet cable.

3. Connect the Ethernet cable from Internet side to the WAN port on the device.

If it is connected to the telephone line, please link the telephone line to the

MODEM and connect the MODEM to the WAN port on the device.

4. When connected, log in to Web manager to set up Internet connection.