User's Manual Part 2

Wireless N300 ADSL2+ High Power Modem Router
135
MAC Restrict Mode: Disabled, Allow and Deny
 Allow: Only allow PCs at specified MAC addresses (in the list) to connect to your wireless network.
 Deny: Block only PCs at specified MAC addresses from connecting to your wireless network.
 Disabled: Disable MAC filter feature.
Add: Click to add a MAC address.
Remove: To delete an existing MAC address, first check the Remove box next to the MAC address in list and then click
this button.
Example: To allow only the PC at the MAC address of 00:1A:3D:9C:BB:23 to connect to your wireless network, do as
follows:
1. Select Allow.
2. Click the Apply/Save button.
3. Enter 00:1A:3D:9C:BB:23 in the MAC address box as shown in the figure below and click Apply/Save.