User's Manual

- 9 -
2.Product Installation Guide
1.Turn off the car engine
2.Insert the TF card into the card slot of dash cam
【Attention】Please use high-speed SD card (Class10 or above,
capacity is not less than 8GB, max to 128GB, and to format the
SD card with the machine or PC before using)
3.Fix the dash cam on the windscreen of your car
4. Insert the car charger into the car cigarette lighter, and please
use the standard car charger.
【Attention】Pave the cable alongside the edge of windshield.
5. Pay attention to the direction while installing the rear camera
in the rear of the vehicle and. Wiring can be laid along the roof
of the vehicle. After installation, connect the rear plug into the
rear camera interface of the recorder AV-IN, and there is no
need to connect the red reversing wire which is no screen cam.
The cable lug should be by insulating tape Instead.
6. Adjust the lens position to ensure that the lens are level with
the ground.
7. Start the engine and check whether the machine is installed
correctly.