User's Manual

(20). GYRO SENS SETTING
User can adjust the gyro sensitivity by transmitter,
AVCS gyro (GY) and normal gyro (STD).
Gyro sensitivity switch plug should plug in the fifth channel
of receiver. The auxiliary channel CH 5 won’t have any
function now. User can set sensitivity switch from switch A to F,
and
also fly model (NORM, IDLE1,2,3).
Setting Method:
Use up/down button to select GYRO sens setting, OK button
is to enter editing.
Steps:
1. Use direction buttons to select editing part.
2. Use +/- button to set fly model at “MODE”.
3. Use +/- button to active or inhibit “Mix”. Press OK button
for seconds can back
default.
4. Use +/- button to set control switch at “CTRL”.
5. Use +/- button to set the switch position when the function
is active.
6. Use +/- button to set the “Rate”. Press OK button for seconds
can back default.
7. Press
EXIT after setting.
INSTRUCTION
AIRPLANE
(21). Code matching
Please refer to page 16.
115