Zigbee SoC Model number: JASMG21A P.
1. Product Description The MG21 Module is a small form factor, certified module, enabling rapid development of wireless mesh networking solutions. Based on the Silicon Labs EFR32MG21 Mighty Gecko SoC, the MGM13P combines an energyefficient, multi-protocol wireless SoC with a proven RF/antenna design and industry leading wireless software stacks. 2.
. Product Specification Model Product Name Standard Data Transfer Rate Modulation Method Frequency Band Channel Operating Voltage Current Consumption Antenna Type Operating Temperature Storage Temperature Humidity JASMG21A Zigbee SoC IEEE 802.15.4 DSSS-OQPSK 250kbps DSSS (O-QPSK) 2.405~2.480GHz CH11-CH26 1.71V~3.8V DC 9.4mA Chip Antenna -40°C ~ +85°C +5 to +40°C 30 to 70% relative humidity 4.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
The OEM integrator is responsible for ensuring that the end-user has no manual instruction to remove or install module. The module is limited to installation in mobile application. A separate approval is required for all other operating configurations, including portable configurations with respect to Part 2.1093 and difference antenna configurations. There is requirement that the grantee provide guidance to the host manufacturer for compliance with Part 15B requirements.
Canada Statement This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
doit également être affichée à l'extérieur de l'appareil où le module est installé. L'étiquette extérieure peut être libellée comme suit: « Contient le Module émetteur IC: 6924A-JASMG21A» ou « contient IC: 6924A-JASMG21A» toute expression similaire qui exprime le même sens. This radio transmitter [IC: 6924A-JASMG21A] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated.
Notice to OEM integrator Must use the device only in host devices that meet the FCC/ISED RF exposure category of mobile, which means the device is installed and used at distances of at least 20cm from persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the transmitter as show in this manual (FCC/Canada statement).
“Contains FCC ID: U2ZJASMG21A”, “Contains Transmitter Module IC: 6924A-JASMG21A” or “Contains IC: 6924A-JASMG21A”. l'hôte doit utiliser l'instrument uniquement dans des dispositifs qui répondent à la fcc / (catégorie d'exposition rf mobile, ce qui signifie le dispositif est installé et utilisé à une distance d'au moins 20 cm de personnes. Le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen déclarations de conformité relatives à l'émetteur que de montrer dans ce manuel.
