XV-Z3000 Operation-Manual GB
Table Of Contents
- Introduction
- Quick Start
- Setup
- Connections
- Basic Operation
- Useful Features
- Operating with the Remote Control
- Menu Items
- Using the Menu Screen
- Picture Adjustment (“Picture” menu)
- Computer Image Adjustment (“Fine Sync” menu)
- Using the “Options” Menu
- Adjusting the Image Position
- Adjusting the Overscan
- Adjusting the Vertical Size of the Display (Subtitle Setting)
- Setting On-screen Display
- Setting the Video System
- Signal Type Setting
- Selecting the HDMI Setting
- Selecting the Background Image
- Auto Power Off Function
- Checking the Lamp Life Status
- Reversing/Inverting Projected Images
- Selecting the Transmission Speed (RS-232C)
- Reducing the Power Consumption When the Power Is in Standby Mode
- Fan Mode Setting
- Returning to the Default Settings
- Selecting the On-screen Display Language
- Appendix
30
The height of the projector can be ad-
justed using the adjustment feet at the
front and rear of the projector.
When the screen is above the projec-
tor, the projection image can be made
higher by adjusting the projector.
1
2
Remove your hands from the
HEIGHT ADJUST lever of the pro-
jector after its height has been
finely adjusted.
• The angle of projection is adjustable up
to 8 degrees from the surface on which
the projector is placed.
Lift the projector to adjust its
height while lifting the HEIGHT
ADJUST lever.
HEIGHT
ADJUST lever
Make small
adjustments.
3 Adjusting the Height
You can adjust the focus with the focus
ring on the projector.
Image Projection (Continued)
Rotate the focus ring to adjust the fo-
cus while watching the projected image.
Focus ring
Adjusting the Projected Image
You can adjust the screen size using
the zoom ring on the projector.
Rotate the zoom ring to enlarge or
shrink the screen size.
Zoom ring
1 Adjusting the Focus
2 Adjusting the Screen Size
XV-Z3000_EN_h 06.1.10, 3:15 PM30