XV-Z21000 Operation-Manual GB
Table Of Contents
- Contents
- Accessories
- IMPORTANT SAFEGUARDS
- Part Names and Functions
- Using the Remote Control
- Quick Start
- Setting Up the Projector
- Samples of Cables for Connection
- Connecting to Video Equipment
- Connecting to a Computer
- Controlling the Projector by a Computer
- Turning the Projector On/Off
- Image Projection
- Operating with the Remote Control
- Selecting the Screen Size
- Menu Bar Items
- Using the Menu Screen
- Picture Adjustment (“Picture” Menu)
- Selecting the Picture Mode
- Adjusting the Image
- Selecting the Gamma Position
- Switching the Iris Setting
- Lamp Setting
- Using the Advanced
- Adjusting the Colors
- Adjusting the BrilliantColor TM
- Selecting the Progressive Mode
- Selecting the Film Mode
- Reducing Image Noise (DNR)
- Mosquito Noise Reduction (MNR)
- Adjusting the Unveil Control
- Adjusting the Automatic Contrast
- Resetting All Adjustment Items
- Gamma Adjustment (“Gamma” Menu)
- Computer Image Adjustment (“Fine Sync” Menu)
- Using the “Options” Menu
- Adjusting the Image Position
- Adjusting the Vertical Size of the Display (Subtitle Setting)
- Adjusting the Overscan
- Adjusting the White Level/Black Level
- Turning LED Off
- Checking the Lamp Life Status
- Setting On-screen Display
- Setting the Video System
- Signal Type Setting
- Adjusting the Color Space
- Adjusting the Dynamic Range
- Selecting the Background Image
- Adjusting the Economy Mode
- Selecting the Transmission Speed (RS-232C)
- Fan Mode Setting
- Reversing/Inverting Projected Images
- Returning to the Default Settings
- Other Function
- Maintenance Indicators/Maintenance
- Regarding the Lamp
- Connecting Pin Assignments
- RS-232C Specifi cations and Command Settings
- Wired Remote Control Terminal Specifications
- Computer Compatibility Chart
- Troubleshooting
- Specifications
- Dimensions
- Index
-49
Appendix
Info
• Be sure to remove the lamp unit by the han-
dle. Be sure not to touch the glass surface of
the lamp unit or the inside of the projector.
• To avoid injury to yourself and damage to the
lamp, be sure to carefully follow the steps
below.
• Do not loosen other screws than for the lamp
unit cover and lamp unit.
(As for the lamp unit, only the silver screws
are loosened.)
1 Press STANDBY on the pro-
jector or
STANDBY on the re-
mote control to put the projector
into the standby mode.
• Wait until the cooling fan stops.
2 Disconnect the power cord.
• Unplug the power cord from the AC
socket.
• Leave the lamp until it has fully cooled
down (about 1 hour).
3 Remove the lamp unit cover.
• Loosen the user service screws that
secure the lamp unit cover. Then open
the cover in the direction of the arrow.
4 Remove the lamp unit.
• Loosen the securing screws from the
lamp unit. Hold the lamp unit by the
handle and pull it in the direction of the
arrow.
Removing and Installing the Lamp Unit
Warning!
• The lamp unit becomes very hot while the projector is operating. Do not remove the lamp
unit from the projector right after use. The lamp and parts around the lamp will be very hot
and may cause burns or injury.
Lamp unit
(Type: AN-K20LP)
Optional
accessory
STANDBY button
STANDBY
User service screws
Lamp unit
Lamp unit cover
Securing screw
Securing screws
Handle
AC socket
XVZ21000EOusyuP46-51.indd49XVZ21000EOusyuP46-51.indd49 2006/07/3119:55:542006/07/3119:55:54