XV-Z21000 Operation-Manual GB
Table Of Contents
- Contents
- Accessories
- IMPORTANT SAFEGUARDS
- Part Names and Functions
- Using the Remote Control
- Quick Start
- Setting Up the Projector
- Samples of Cables for Connection
- Connecting to Video Equipment
- Connecting to a Computer
- Controlling the Projector by a Computer
- Turning the Projector On/Off
- Image Projection
- Operating with the Remote Control
- Selecting the Screen Size
- Menu Bar Items
- Using the Menu Screen
- Picture Adjustment (“Picture” Menu)
- Selecting the Picture Mode
- Adjusting the Image
- Selecting the Gamma Position
- Switching the Iris Setting
- Lamp Setting
- Using the Advanced
- Adjusting the Colors
- Adjusting the BrilliantColor TM
- Selecting the Progressive Mode
- Selecting the Film Mode
- Reducing Image Noise (DNR)
- Mosquito Noise Reduction (MNR)
- Adjusting the Unveil Control
- Adjusting the Automatic Contrast
- Resetting All Adjustment Items
- Gamma Adjustment (“Gamma” Menu)
- Computer Image Adjustment (“Fine Sync” Menu)
- Using the “Options” Menu
- Adjusting the Image Position
- Adjusting the Vertical Size of the Display (Subtitle Setting)
- Adjusting the Overscan
- Adjusting the White Level/Black Level
- Turning LED Off
- Checking the Lamp Life Status
- Setting On-screen Display
- Setting the Video System
- Signal Type Setting
- Adjusting the Color Space
- Adjusting the Dynamic Range
- Selecting the Background Image
- Adjusting the Economy Mode
- Selecting the Transmission Speed (RS-232C)
- Fan Mode Setting
- Reversing/Inverting Projected Images
- Returning to the Default Settings
- Other Function
- Maintenance Indicators/Maintenance
- Regarding the Lamp
- Connecting Pin Assignments
- RS-232C Specifi cations and Command Settings
- Wired Remote Control Terminal Specifications
- Computer Compatibility Chart
- Troubleshooting
- Specifications
- Dimensions
- Index
-45
Useful Feature
Menu operation ⇒ Page 34
■ Auto Power Off
This function automatically switches the projector
to Standby mode if no signals are received for a set
period.
Note
• When the Auto Power Off function is set to “ON”,
5 minutes before the projector enters standby
mode, the message “Enter STANDBY mode in
X min.” will appear on the screen to indicate the
remaining minutes.
• When the Auto Power Off function is set to “OFF”,
“LED” is set to “On” automatically. Be sure to set
the Auto Power Off function to “ON” to use the
LED Off function. (See page 43.)
Make sure that both the projector and computer are set
for the same baud rate.
This function changes the fan rotation speed.
• When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.
Selectable items Description
ON When no input signal is detected for
more than 15 minutes, the projector will
automatically enter standby mode.
OFF The Auto Power Off function will be
disabled.
r Fan Mode Setting
e Selecting the Transmission
Speed (RS-232C)
Selectable items Description
9600bps
38400bps
115200bps
Transmission speed is slow.
Transmission speed is rapid.
Selectable items Description
Normal Suitable for normal environments.
High Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
t Reversing/Inverting Projected
Images
This function allows the projector to be used in a wider
range of projection styles by allowing the image to be
inverted to suit the projection environment (location).
• See page 15 for details of Projection (PRJ) Mode.
Use “All Reset” to initialize all the adjustments you have
made to the default settings.
Note
The following items cannot be initialized.
• “Fine Sync” menu
— Special Modes
• “Options” menu
— Lamp Timer (Life)
— Language
Other Function
The projector can switch the on-screen display language
among 11 languages.
Selectable items Description
Front Normal image (Projected from the front
of the screen)
Ceiling + Front Inverted image (Projected from the
front of the screen with an inverted
projector)
Rear Reversed image (Projected from the
rear of the screen or with a mirror)
Ceiling + Rear Reversed and inverted image (Pro-
jected with a mirror)
y
Returning to the Default Settings
Selecting the On-screen
Display Language
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
XVZ21000EOusyuP36-45.indd45XVZ21000EOusyuP36-45.indd45 2006/07/3119:55:322006/07/3119:55:32