- XV-Z3100 PROJECTOR OPERATION MANUAL

Appendix

Replace the filter holders.

• Align the tabs on the filter holders while

replacing them, and then press down on

the tabs to lock them in place.

Replacing the Dust Filters

• If the filters become too dirty to clean

effectively, purchase new ones

(PFILDA025WJZZ) from your nearest Sharp

Authorized Projector Dealer or Service Center.

After removing the filter holders (see

step 2 of “Cleaning the Dust Filters”),

remove the dust filters, then replace with

new ones.

• Pick the dust filters up with your fingers and lift

them out of the filter holders.

• With the reinforcement seal facing down, place

the dust filters underneath the tabs on the filter

holders.

Info

Reinforcement seal

• Be sure the filter holders are securely installed.

The power will not turn on unless it is correctly

installed.

Note

XV-Z3100_EN_l 06.10.18, 7:35 AM53