PROJECTOR XV-Z3000U OPERATION MANUAL

Basic
Operation
29
On-screen Display (confirmation message)
1
2
Turning the Power off (Putting
the Projector into Standby Mode)
Press SSTANDBY/ON on the pro-
jector or aSTANDBY on the re-
mote control, then press that but-
ton again while the confirmation
message is displayed, to put the
projector into standby mode.
Unplug the power cord from the AC
outlet after the cooling fan stops.
The power indicator on the projector
blinks in green while cooling.
The power indicator changes to red when
the projector finishes cooling.
Do not unplug the power cord during projection
or cooling fan operation. This can cause dam-
age due to rise in internal temperature, as the
cooling fan also stops.
Info
R
STANDBY
button
Switching the Input Mode
Press the appropriate INPUT button on
the remote control to select the desired
input mode.
When pressing INPUT (P/R) on the projector,
input mode switches in the following order:
INPUT1 INPUT2 INPUT3
INPUT6 INPUT5 INPUT4
Select the appropriate input mode for
the connected equipment.
INPUT buttons
Image Projection
XV-Z3000_US_EN_h 06.1.13, 8:58 AM29