Projector User Manual

Setup and Connections
Optional
accessory
DVI to 15-pin D-sub adaptor
Type: AN-A1DV (7.9" (20 cm))
Connecting to RGB
Video Equipment Using
the DVI to 15-pin D-sub
Adaptor and the RGB
Cable (INPUT 2)
Use the DVI to 15-pin D-sub adaptor and the
RGB cable when connecting RGB video equip-
ment such as DVD players and DTV decoders
to INPUT 2 terminal.
1 Connect a DVI to 15-pin D-sub
adaptor to the projector.
2 Connect the above adaptor to
an RGB cable.
3 Connect the above cable to the
video equipment.
• Secure the connectors by tightening the
thumbscrews.
Note
• When connecting this projector to DVI out-
put of the DTV decoder, select “RGB” for
“Signal Type” on the OSD menu or press
on the remote control. (See page 52.)
To RGB output terminal
RGB cable
(commercially
available)
To INPUT 2 terminal
DVD player or
DTV decoder
DVI to 15-pin
D-sub adaptor
(sold separately)
-19
XV_Z200U_E_p13_28.p65 03.10.28, 1:53 PM19