Projector User Manual

Setup and Connections
-17
Connecting to a DVD Player and DTV Decoder
To analog component
output terminal
To INPUT 1 terminals
DVD player or
DTV decoder
Component cable
(commercially available)
Connecting to
Component Video
Equipment Using a
Component Cable
(INPUT 1)
Use a component cable when connecting com-
ponent video equipment such as DVD players
and DTV decoders to INPUT 1 terminals.
1 Connect a component cable to
the projector.
2 Connect the above cable to the
component video equipment.
Note
• Make sure to turn both the projector and
the video equipment off before connect-
ing.
XV_Z200U_E_p13_28.p65 03.10.21, 4:09 PM17