User's Manual

Ceiling-mount Setup

■ It is recommended that you use the optional

Sharp ceiling-mount bracket for this installa-

tion. Before mounting the projector, contact

your nearest Sharp Authorized Projector

Dealer or Service Center to obtain the rec-

ommended ceiling-mount bracket (sold sepa-

rately).

• AN-XRCM30 ceiling-mount bracket (for

U.S.A.).

• AN-60KT ceiling-mount bracket, its AN-

TK201 and AN-TK202 extension tubes (for

countries other than the U.S.A.).

■ Invert the image by setting “Ceiling + Front”

in “PRJ Mode”. See page 42 for use of this

function.

Setting up the Projector

For optimal image quality, position the projector perpendicular to the screen with the projector’s feet

flat and level. Doing so will eliminate the need for Keystone correction and provide the best image

quality. (See page 31.)

Side View

Standard Setup (Front Projection)

■ Place the projector at the required distance from the screen according

to the desired picture size. (See page 20.)

Example of standard setup

Screen

Lens center

• Refer to page 20 for additional information concerning “Screen Size and Projection Distance”.

Note