Operation Manual
(Continued)
■ Connecting the AC power lead
Connect the AC power lead to the AC power
input socket, then connect the AC power lead
plug to an AC socket.
Notes:
● Unplug the AC power lead from the AC socket
if the unit is not to be used for a prolonged
period of time.
● Never use a power lead other than the one
supplied. Otherwise, a malfunction or an acci-
dent may occur.
■ Remote control
● When inserting or removing the batteries, push
them towards the battery terminals.
● Installing the batteries incorrectly may cause
the unit to malfunction.
Precautions for battery use:
● Insert the batteries according to the direction
indicated in the battery compartment.
● Replace all old batteries with new ones at the
same time.
● Do not mix old and new batteries.
● Remove the batteries if they are weak or if the
unit will not be used for long periods of time.
This will prevent potential damage due to bat-
tery leakage.
Caution:
Do not use rechargeable batteries (nickel-cad-
mium battery, etc.).
Notes concerning use:
● Replace the batteries if the operating distance is
reduced or if the operation becomes erratic.
● Periodically clean the transmitter LED on the re-
mote control and the sensor on the main unit with
a soft cloth.
● Exposing the sensor on the main unit to strong
light may interfere with operation. Change the
lighting or the direction of the unit.
● Keep the remote control away from moisture, ex-
cessive heat, shock, and vibrations.
AC 230 V, 50 Hz
To AC INPUT
To an AC socket
● 2 "AA" size batteries
(UM/SUM-3, R6,
HP-7 or similar)
15
15
0.2 m - 6 m
(8" - 20")
● Batteries are
not included.
XL-530E(SUK) TINSE0017SJZZ
4