Multimedia Projectors Operation Manual
-42
Geometric Adjustment
Upper Left Upper Right Lower Right
Lower Left
GEOMETRIC ADJUSTMENT
1 Press
on the projector or
on the remote control re-
peatedly until “GEOMETRIC
ADJUSTMENT” is displayed.
2 Press the buttons below to ad-
just the position, size or focus
of the projected image.
• Match screen’s four sides to green
test pattern.
• Pressing
''
''
',
""
""
",
\\
\\
\ or
||
||
| on the projector
or
on the remote control allows you
to shift the lens.
• Pressing
on the projector or on
the remote control allows you to adjust
the projected image size.
• Pressing
on the projector or on
the remote control allows you to adjust
the focus.
3 Press on the projector or
on the remote control.
4 Press ', ", \ or | to move the
position for the upper left of the
image.
• Move the upper left of the yellow frame
onto the upper left of the screen.
5 Press or to set the posi-
tion.
6
Repeat the same procedure with the
positions for the upper right, lower
right and lower left of the image.
• At this time, pressing on the pro-
jector or
on the remote control re-
turns to the previous screen.
• Before correcting the upper left of the
image, pressing
or returns
to the reset confirmation screen.
• When the position of the lower left is
set, the correction is made and the
display disappears.
Image Projection
▼On-screen Display