Service manual
138
VL-SD20U
Ref. No. Part No. ★ Description Code Ref. No. Part No. ★ Description Code
VL-FD1U
VL-FD1U SERVICE JIG SPECIFICATIONS
1-1. Adjusting jigs for checking the mechanism
No. Name
New part
Type number, Application Part code Code
1 PB-use cassette torque meter 1mN·m/15mN·m 9DASD-1015 DB
2 Torque gauge
For use in VS-REW take up torque adjustment
JiGTG0045 CN
3 Torque gauge head For use with the above torque gauge 9EQTGH-DH5000 BW
4 Tension gauge 4N For measuring of pinch roller pressure JiGSG0400 BK
5 Dial tension gauge PTG-10 9DAPTG-10-10W CA
6 Torque screwdriver 150mN·m No. 0 cross bit JiGTD1500RTDH CB5
7 Master plane For checking the reel base height 9EQMP-VLPD1 CL
8 Height adjustment jig For height adjusting 9DAHG-PD1 BZ
9 Height adjustment screwdriver For guide roller adjustment. 9EQDRiVER-DH5 BC
For Tu guide adjustment.
For T roller adjustment.
Bit shape.
10 Alignment tape - I For tape running adjustment VR3-GAZXS CF
11 Alignment tape - II For Switching Point adjustment VR3-GTZQS CG
12 For hexagon nut opposite side 3mm bit For S guide hexagon nut installation. 95CM22001 BL
13 Reel hub for back tension measurement Refer to Service Manual. Prepared in the service station. –
14 String for measuring the pinch roller pressure Refer to Service Manual. Prepared in the service station. –
1-2. Parts for periodical inspection and maintenance
No. Name
New part
Type number, Application Part code Code
1 OiL Cosumo Hydro HV22 9EQ-OiL-HV22 AE
2 Cleaning paper Dusper ∑ (SIGMA) ozu Co., LTD JiGDUSPER AP
3 Grease: Moly Coat YM-103 Dow coaning 99FGREASE-YM103 AH