Operation Manual

GB-22
CUSTOMISED INSTALLATION
MANUALLY TUNING A CHANNEL
Normally it will not be necessary to tune in a broadcast channel manually except in unusual
circumstances such as poor signal.
Ensure the video channel is selected on the TV.
1. Press MENU.
2. Press [K/L] to select SET UP. Press SET to
confirm.
3. CHANNEL PRESET will be highlighted.
Press
SET.
4. Press [K/L] to select CHANNEL.
5. Press [ ] to select CH or CC. This will
determine whether off air (CH) or cable (CC)
is tuned first. Note that both off air and cable
will be tuned regardless of setting.
6. Press [H/J] to start tuning in either direction. Tuning will stop when a channel is received.
If it is not the desired channel, press [
H/J] to continue tuning.
7. Press [K/L] to select FINE TUNING. Press and hold [H/J] until the sharpest colour
picture is obtained.
9. Press [K/L] to select SKIP. The SKIP function determines whether the channel can be
selected when using the
CHANNEL [K/L] instead of the NUMBER BUTTONS.
Press [
H/J] to select ON or OFF for this option.
10. Press SET to confirm.
11. Press MENU to leave this function.
IMPORTANT NOTE:
8. If you connect an independent decoder, you must press [K/L] to select DECODER,
then select [
H/J] to turn the decoder function ON.
➔
PRESET 1 ARD1
CHANNEL CH2 1
FINE TUNING
▲
▲
DECODER ON OFF
SKIP ON OFF
INSTALLAT I ON
CHANNEL PRESET
CHANNEL SORT
CLOCK
LANGUAGE