User Manual

14
If problems persist contact the SHARP Helpline on tel: [phone]
BASIC OPERATION
HOW TO SET A DELAYED RECORDING
7. Enter the start time using the [ / ] or the
NUMBER BUTTONS, hours first then
minutes (when entering less than 10 hours or
minutes add a '0' before the number), for
example for 21:05 start, press
2 1 0 5.
Then press to move to the next setting.
8. Enter the stop time, for example for 22:30 stop,
press 2 2 3 0.
9.
If your VCR has long play facility and you wish to
change the RECORDING SPEED, use the
[ / ] to highlight SP. Press [ / ] to
select standard play (SP) or long play (LP) as
required.
10. Press the SET button to confirm.
• The MENU now shows all the timer settings you
have entered. If you wish to make additional
timer recordings, repeat this procedure.
11. When you have completed entering timer
settings, press the
MENU button to
remove the menu from the TV screen.
12. Ensure that the tape on which you wish
to record is inserted into the VCR, then
press the TIMER ON/OFF
button
once to place the VCR in TIMER
STANDBY mode. will be shown on
the display.
NOTES:
• If flashes a video tape has not been inserted into the VCR.
• If the video tape is ejected when the VCR tries to record the record protection tab has
been removed.
• During recording, press STOP to cancel the recording. If there are further
recordings to be made, the VCR will return to TIMER STANDBY.
1/2
DATE PR START STOP
21/060212:0013:00SP
9/07D03
21:05 -:-- SP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
1/2
DATE PR START STOP
21/060212:0013:00SP
9/07D03 21:05
22:30 LP
--/-- -- -:-- -:-- --
--/-- -- -:-- -:-- --
SET
TIMER
ON/OFF
STOP