Operation Manual

Sending Documents From Memory
110
3
Enter the number of the receiving
machine using one of the following
methods:
•
Press a Rapid Key.
•
Press the
SPEED DIAL
key and
enter a Speed Dial number.
•
Enter a full telephone number by
pressing the number keys.
4
Press the
START/MEMORY
key if
you entered a Speed Dial number or a
full number.
•
The document will be scanned and
stored in memory. Your fax will
then dial the receiving machine and
transmit the document (redialing
will take place automatically if
necessary).
If the memory becomes full...
If the memory becomes full while the document is being scanned,
MEMORY IS FULL will appear in the display.
♦
Press the
START/MEMORY
key if you want to transmit the pages
which have been stored up to that point in memory. The remaining
pages will be ejected from the feeder. After transmission, the mem-
ory will be cleared and you can transmit the remaining pages. You
will also need to transmit the page which was being scanned when
the memory filled up.
♦
Press the
STOP
key if you want to cancel the entire transmission.
01 02 03
(Example)
START/MEMORY
all-ux340L.book Page 110 Thursday, December 23, 1999 5:37 PM