User`s guide

38 Chapter 2: Printing Tasks
EN
Loading Envelopes in Tray 1
1
Open Tray 1, but do not pull out the
extension. (Envelopes feed best
without the extension.)
2
Open the rear output bin and pull out
the tray extension. (This reduces
envelope curl and wrinkling.)
3
Load up to 10 envelopes in the
center of Tray 1 with the
side-to-be-printed facing up, and the
postage-end toward the printer.
Slide the envelopes into the printer
as far as they will go without forcing
them.
4
Adjust the guides to touch the
envelope stack without bending the
envelopes. Make sure the
envelopes fit under the tabs on the
guides.