UP-800F/810F Operation-Manual GB

202
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter “0” for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as “0”, no RS-232 channel is assigned.
• PRINTER (Use the selective entry)
Select the printer to be used from the following:
TM-T88(3)/T88(4)
TM-U220/230
TM-U295
TM-T88(3)(4)+LOGO
• INITIAL FEED# (Use the numeric entry)
Initial line feed for a slip (0 to 64 lines)
• SLIP MAX LINE (Use the numeric entry)
Maximum number of lines printable on a slip (0 to 99)
• VP PRINT TIMES (Use the numeric entry)
Number of times of validation printing (0 to 9)
■ Slip printer
Procedure
Program each item as follows:
• TERMINAL# (Use the numeric entry)
Terminal number (1 through 254 : Enter “0” for local device.)
• CHANNEL# (Use the numeric entry)
Channel number (1 through 7)
When you program as “0”, no RS-232 channel is assigned.
• PRINTER (Use the selective entry)
Select the printer to be used from the following:
TM-T88(3)/T88(4)
TM-U220/230
TM-T88(3)(4)+LOGO
BUILT-IN(810) (Built-in printer)
BUILT-IN(820) (Built-in printer)
• AUTO CUTTER (Use the selective entry)
Auto cutter function
YES: Enables auto cutter function.
NO: Disables auto cutter function.
• HEAD LOGO PRINT (Use the selective entry)
Select a header logo print timing.
EACH ISSUE: The logo will be printed on the receipt just after
the current transaction is finalized.
PRE-PRINT: The logo will be printed beforehand on the next
receipt when the current transaction is finalized.
• RCPT LENGTH (Use the numeric entry)
Minimum length for bill on receipt (0 to 30)
■ Receipt printer
Procedure