UP-3500 Operation-Manual Second-Edition GB

281
■■
■■
■ Remote printer (DEVICE CONFIG
➝
KP#1 through KP#9 ....... PGM2)
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [DEVICE CONFIG] button to display the menu, and touch the [KP#1] through [KP#9] button
to program details.
(3) Select the required programming item, and enter or select each parameter, then touch the [ENTER]
key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text Parameter
[0] : [SELF TERMINAL No.] : This means local device.
TERMINAL# [1-254 (EXCEPT SELF TERMINAL NO.)] : RS232 connection (SHARED DEVICE)
TCP/IP (4th octet of IP address)
CHANNEL#
0: not connect/TCP/IP connection
1-5 : RS232 connection (channel#)
ER-01PU
TM-T90
PRINTER TM-H6000
TM-T88(3)/T88(4): (42 digits)
TM-U200/230: (40 digits)
AUTO CUTTER
NO: Disables auto cutter
YES: Enables auto cutter
Select the type of receipt print formats.
ADDITION: Addition
PRINT TYPE
S/D: Single/Double
ADD.+S: Addition + Single
D ADD.: Double addition
D ADD+S: Double addition + Single
You can assign a second remote printer to which data should be output when the first
SECOND KP remote printer encounters an error during transmission of the data.
Second remote printer number (0 to 9)
NAME Description for the remote printer (max. 12 characters)
INITIAL FEED# Initial line feed for a remote printer (0 to 64)
Sort receipt cutting between each sort group
SORT RCPT. CUTTING YES: Enables sort receipt cutting.
NO: Disables sort receipt cutting.
Sequential print from sort group 1 except header and footer
SEQUENTIAL PRINT YES: Enables sequential print.
NO: Disables sequential print.