Operation Manual, User's Manual

7-98
SETTING MODE►SYSTEM SETTINGS
Wireless Setting screen (Infrastructure Mode)
If [Connection Type] is set to [Wireless (Infrastructure Mode)] and the [Setup] button is clicked, the infrastructure mode
wireless setting screen is displayed.
Configure the SSID of a wireless LAN, Security Type, Encry., and Security Key. Clicking the [Submit] button stores the
settings.
Access Point Search
Click this to search access points. When the search results are displayed, select the access point to use and click [OK].
[SSID], [Security Type], and [Encry.] are automatically applied.
SSID
Enter an SSID using up to 32 characters.
Security Type
Select a security type.
Encry.
Select an encryption type.
Security Key
Enter a security key.
* Can be used with MX-B356WH/MX-B456WH.
Show Security Key
If it is set to ON, the security key appears.
Security Type Security Key
• WEP
• WPA/WPA2-mixed Personal
• WPA2 Personal
• WPA2/WPA3-mixed Personal
*
• WPA3 Personal
*
WEP64bit: 5 characters or 10-digit hexadecimal number
WEP128bit: 13 characters or 26-digit hexadecimal number
WPA/WPA2/WPA3: 8 to 63 characters or 64-digit hexadecimal number
WPA/WPA2-mixed Enterprise, WPA2 Enterprise, WPA2/WPA3-mixed Enterprise and WPA3 Enterprise must be configured
separately in IEEE802.1x Settings.
(WPA2/WPA3-mixed Enterprise and WPA3 Enterprise are available for MX-B356WH/MX-B456WH.)