Operation Manual, Troubleshooting

5
General Problems
Placing the original and adding paper
Do not exceed the
indicator line
Align the edges and place
face up Insert all the way in
Adjust to the original size
If the original has a fold, straighten the fold before
placing. (This prevents original misfeeds and incorrect
detection of the original size)
●Automatic Document Feeder
●Document glass
Place the original in the back left corner.
If the original has a fold, straighten the fold before placing.
(This prevents original misfeeds and incorrect detection of
the original size)
Mark
Platen
Scale
Original size detector
●Paper tray
Fan the paper
well before
loading it.
Set the guides to the size of the paper.
The paper must not exceed the maximum number of
sheets and must not be higher than the indicator line.
●Bypass tray
Pull the extension guide all the way
out. (A4R (8-1/2 x 11"R) or more)
Load the paper with the print
side facing down.
Adjust the bypass tray
guides so that they slightly
contact the loaded paper.
Is the original placed correctly?
Is the paper loaded correctly?
The paper must not exceed
the maximum number of
sheets and must not be
higher than the indicator line.
If the original is stapled, be sure to remove the staples and
fan the pages well before placing. (This is to prevent
misfeeding and tearing of the original, and to prevent torn
fragments of the original from remaining in the feeder.)
(Tray 1 only)