Operation Manual
Table Of Contents
- IMPORTANT INFORMATION
- DEAR SHARP CUSTOMER
- SAFETY PRECAUTIONS
- TIPS AND SAFETY INSTRUCTIONS
- MOUNTING PRECAUTIONS
- Supplied Components
- System Requirements
- Part Names
- Connecting Peripheral Equipment
- Connecting the Power Cord
- Binding Cables
- Affixing the Stand Hole Protection Covers
- Preparing the Remote Control Unit
- Removing the Handles (PN-80SC5/PN-70SC5 only)
- Mounting a web camera
- Turning Power On/Off
- Touch action
- Basic Operation
- Menu Items
- Functional Restriction Setting (FUNCTION)
- Controlling the Monitor with a PC (RS-232C)
- Troubleshooting
- Specifications
- Mounting Precautions (For SHARP dealers and service engineers)
27
E
Menu Items
■ AUDIO
AUDIO SETTINGS
Set by the currently selected picture mode.
TREBLE
Adjusts the volume of treble-level sound.
BASS
Adjusts the volume of bass-level sound.
BALANCE
Adjusts the balance of the audio sound between right and left.
RESET
Resets the values of the AUDIO menu items of the currently selected picture mode to the factory default settings.
■ ECOLOGY
OPERATION MODE
MODE1 ..................... OFF IF NO OPERATION is set to 4HR..
(These settings can not be changed.)
MODE2 ..................... Will perform standard operation. OFF IF NO OPERATION is set to DISABLE. These settings can be changed.
OFF IF NO SIGNAL
Determines whether or not the monitor will go into standby mode when a video signal is not received for 15 minutes. When
5 minutes remain until switching to standby mode, the remaining time will be shown by minute. The default setting for this
function is DISABLE. If this function is set to ENABLE the monitor will go into standby mode 15 minutes after a connected PC
goes into sleep mode. Monitor power will not be restored automatically when the connected PC wakes up. The user will need
to use the remote control unit to manually restore power to the monitor.
OFF IF NO OPERATION
Determines whether or not to set the monitor to go into standby mode when there is no operation for a certain period of time.
Set the standby mode entry time. The entry time can be set to a maximum of 12 hours in increments of 1 hour.
When 5 minutes remain until switching to standby mode, the remaining time will be shown by minute.
BACKLIGHT OFF
When set to ON, the backlight turns off. Audio does not turn off.
■ SETUP
HDMI AUTO WIDE
Set whether the picture size is automatically selected based on the signal received from the device that is connected to HDMI.
HDMI CEC LINK
When ON is selected, HDMI CEC LINK is enabled, and when operation starts on an external device, the monitor power
automatically turns on and input switches to the connected HDMI input terminal. In case of the unintended movement, select
OFF.
LANGUAGE
Sets the display language for the menu screen.
SOFTWARE VERSION
Shows the software version, etc.
ALL RESET
Resets all the settings to the factory default settings. If the video is distorted after this is executed, turn on/off the main power.