Owner`s manual

33Heat & Glo • SL-550 / 750 / 950TR-E • 2118-900 Rev. K • 9/08

C. Securing and Leveling the Appliance

The diagram shows how to properly position, level, and

secure the appliance (see Figure 7.11). Nailing tabs are pro-

vided to secure the appliance to the framing members.

• Venting - refer to Vent Clearances and Framing (Section

6.B) for hole location.

• Place the appliance into position.

• Level the appliance from side to side and front to

back.

• Shim the appliance, as necessary. It is acceptable to

use wood shims.

• Bend out nailing tabs on each side.

• Keep nailing tabs ﬂ ush with the framing.

• Secure the appliance to the framing by using nails or

screws through the nailing tabs.

Figure 7.13 Proper Positioning, Leveling and Securing of an

Appliance

NAILING TABS

BOTH SIDES

Fire Risk.

• Prevent contact with sagging, loose insulation.

• Do NOT install against combustible materials

such as exposed insulation, plastic and insulation

backer.

Fire Risk.

• ALWAYS maintain speciﬁ ed

clearances around the appliance.

• Do NOT notch into the framing around the appliance spacers.

Failure to keep insulation, framing or other material away from

the appliance may cause ﬁ re.

WARNING