User's Manual

ManualsBrandsSharp ManualsFlat Panel TVSharp Sharp Flat Panel Television LC60LE650U

Boot Picture

With this function activated, the SHARP logo will be

displayed when you turn on the TV.

NOTE

• This function is not available when the TV is set to

"Quick Start Mode".

Response Tone

(For the LE857U, LE757U, LE755U and C7500U models)

With this item set to "On", the TV will give off

operation sound when you use the SmartCentral

function.

NOTE

• If an external speaker is used, the operation sound will

not be heard.

Demo Mode

You can select the image from several types of demo

mode.

If you have selected "Auto Play", you need to select

the desired playback type(s), and then set the

playback time.

Continuous: Plays demos continuously.

10 min.: Plays demos every 10 minutes.

20 min.: Plays demos every 20 minutes.

NOTE

• What kinds of setting item are available depends on

the model of your TV.

• This function will be canceled when you press EXIT on

the remote control unit.

• "Demo Mode" may not be selected depending on input

signal type or application status.

• "Demo Mode" may be automatically canceled

depending on input signal type.

Initial Setup

NOTE

• For operating the on-screen display menu, see page 22.

• When you select "EZ Setup", "CH Setup", "Parental

CTRL" or "Reset", you can enter the 4-digit secret

number here. See page 29 for setting a secret number.

EZ Setup

You can run EZ Setup again, even after setting up

the preset channels.

Language: Select from among 3 languages (English,

French and Spanish).

Location & Time: Make settings for the country,

area and time zone where you use the TV.

Select your country: Select either "United

States", "Canada" or "Mexico".

Select your time zone: Select your time zone.

The available settings differ depending on the

selected country.

Select DST (Daylight Savings Time): Select

"Auto", "Manual" or "Off".

TV Location: Select "Home" or "Store" for the

location where you plan to install the TV. This

product qualiﬁ es for ENERGY STAR*

in Home

mode default setting.

Home: "Power Saving" is set to "Advanced", and

AV MODE is set to "STANDARD (ENERGY

STAR)"*

Store: "Power Saving" is set to "Off" and AV

MODE is set to "DYNAMIC (Fixed)". Picture

Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to

"DYNAMIC (Fixed)" regardless of whether

Picture Reset is "On" or "Off". If you select

"On", AV MODE will be reset to "DYNAMIC

(Fixed)" if there is no operation for 30

minutes. When "Off" is selected, AV MODE

will be set to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after

all the settings are completed, the Feature

Demo screen is displayed if there is no

operation for several minutes.

• ENERGY STAR qualiﬁ cation is based on AV

MODE "STANDARD (ENERGY STAR)".*

Antenna & Cable/STB: Select the type of

connection you will use to watch TV.

Air/Cable: Make sure what kind of connection

is made with your TV when selecting "Air" or

"Cable".

CH Search: Channel auto search makes the TV look

for all channels viewable in the set area.

• If "Cable" is selected for Antenna setting,

scrambled channels are removed after the

Channel search has been completed.

Network: When you connect to the Internet on the

TV, conﬁ rm the connection method and make

adjustments.

• Wireless LAN connection is possible only when

the WPS (push button) method is used. If any

other method is used, make settings by Initial

Setup > Internet Setup > Network Setup. (See

pages 46 to 47.)

Completed: The settings conﬁ rmation screen is

displayed. Conﬁ rm the information displayed on

the screen.

NOTE

• *1: Except for LC-90LE657U

• See Initial Installation on pages 16 to 17 for setting

each item.

• If no channel is found, conﬁ rm the type of connection

made with your TV and try "EZ Setup" again.

• If you select "Analog Search Start" and initiate the

channel search, the CH Memory for Cable Digital will

be deleted.

Broadcasting Setup

CH Setup

If Initial Installation does not memorize all the

channels in your region, follow the instructions below

to manually memorize the channels.

Air/Cable: Make sure what kind of connection

is made with your TV when selecting "Air" or

"Cable".

CH Search: Channel auto search makes the TV look

for all channels viewable in the set area.

CH Memory: You can select the channels to skip in

each ANALOG (Air), ANALOG (Cable), DIGITAL

(Air) and DIGITAL (Cable).

On: Skips channels. (Channel selection disabled

using CH

Off: Does not skip channels. (Channel selection

enabled using CH

Remove Scrambled CH: This function makes the

TV look for and then delete digital cable channels

that are scrambled and so unavailable in the

set area. The process may take more than 20

minutes.

Yes: Starts to remove scrambled channels.

No: This function does not work.

NOTE

• See Initial Installation on pages 16 to 17 for setting

each item.

• If no channel is found, conﬁ rm the type of connection

made with your TV and try channel search again.

• If you select "Analog Search Start" and initiate the

channel search, the CH Memory for Cable Digital will

be deleted.

Favorite CH (Favorite Channel Setting)

This function allows you to program 4 favorite

channels, in 4 different categories. By setting the

favorite channels in advance, you can select your

favorite channels easily.

To register your favorite channel:

Select "Register" and then press ENTER. Press

to select the position in the category, and

then press ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER.

Press

to select the channel you want

to delete, and then press ENTER. Select "Yes" and

then press ENTER.

To delete all the favorite channels, select "All Data

Clear".

NOTE

• Before setting the channel, select the channel you

want to register as a favorite channel.

• You can display the "Favorite CH" screen by pressing

FAVORITE CH on the remote control.

Antenna Setup-DIGITAL

In order to receive digital air broadcasts, you need

a digital broadcast antenna. You can conﬁ rm the

antenna conﬁ guration through the "Antenna Setup-

DIGITAL" screen. If necessary, adjust the direction of

the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL

channel is displayed. The signal information is

based on the current channel.

Channel Strength: Input the 2-digit channel number

to check the signal strength of the selected

channel. Make sure the signal is strong enough

for each channel.

• This function is available for DIGITAL (Air) only.

On-Screen Display Menu

LC-80LE857U_757U_657U_E.indd 28 2013/02/23 16:35:13