User's Manual

ManualsBrandsSharp ManualsFlat Panel TVSharp Sharp Flat Panel Television LC60LE650U

QUICK REFERENCE

• Before attaching (or detaching) the stand, unplug the AC cord.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from

being damaged.

CAUTION

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

■

LC-80LE857U

Conﬁ rm that there are 14 screws (8 long screws,

4 middle screws and 2 short screws) supplied

with the stand unit.

Attach the supporting post for the stand unit

onto the base as shown below.

• The supporting post attaches to the base at an

offcentered location on the base. Be sure to attach

the supporting post in the direction indicated

below and attach the stand to the TV with the

wider side of the base facing forward.

Long screws

Build the work table. (See page 7.)

Insert the stand into the openings on the rear of

the TV.

• Make sure that the stand is ﬁ rmly inserted into the TV.

Improper installation may result in tilting of the TV set.

Soft cushion

Insert and tighten the 4 screws into the 4 holes

on the rear of the stand unit.

Middle screws

Insert the stand cover.

Insert the screw to secure the stand cover.

Short screws

■

LC-80LE757U

Conﬁrm that there are 12 screws (6 long screws,

4 middle screws and 2 short screws) supplied

with the stand unit.

Set the post for the stand unit onto the

polystyrene foam.

Attach the base to the post.

Insert and tighten the 6 screws into the 6

holes on the bottom of the base.

• Hold the stand unit securely with one hand,

and then tighten the screws.

FRONT

Long screws

Build the work table. (See page 7.)

Insert the stand into the openings on the rear of

the TV.

• Make sure that the stand is ﬁ rmly inserted into the

TV. Improper installation may result in tilting of the

TV set.