Data Projector Operation Manual
Table Of Contents
- Introduction
- Easy Start
- Setup
- Connections
- Basic Operation
- Useful Features
- Operating with the Remote Control
- Menu Items
- Using the Menu Screen
- Picture Adjustment (“Picture” Menu)
- Signal Adjustment (“SIG-ADJ” Menu)
- Adjusting the Projected Image (“SCR-ADJ” Menu)
- Adjusting the Projector Function (“PRJ-ADJ1/2” Menu)
- Auto Sync (Auto Sync Adjustment)
- Auto Power Off Function
- Auto Restart Function
- Speaker Setting
- Selecting the Transmission Speed (RS-232C)
- Fan Mode Setting
- System Lock Function
- Keylock Function
- Selecting the Quick Start Menu
- COMPUTER2 Select
- Setting the FUNCTION Button Operation
- STANDBY Mode
- DLP® LinkTM
- DLP® LinkTM Invert
- Returning to the Default Settings
- Checking the Lamp Life Status
- Setting Up the Projector Network Environment (“Network” Menu)
- Appendix
56
6
Confi rming the
Projector Information
You can confi rm the following items.
Selectable
items
Description
IP Address The IP address of the projector is
displayed.
MAC Address The MAC address of the projector is
displayed.
Projector The projector name is displayed.
Link Displays the network connection
status.
Connected Connected to the
network.
Disconnected Disconnected from
the network.
For information on how to change the
projector name, see “SETUP MANUAL”
contained in the supplied CD-ROM.
•
Note
Setting Up the Projector Network Environment (“Network” Menu)
(Continued)
Menu operation n Page 40