1-BIT DIGITAL AUDIO SYSTEM OPERATION MANUAL SD-EX200

SD-EX200

03/3/14

SD-EX200_sec.fm

TINSZ0523AWZZ

Preparation for Use

- General control -

General control

 To turn the power on

Press the ON/STAND-BY button to turn the power on.

If the power does not turn on, check the AC power cord is plugged in properly.

Note:

When turning on the power right after it is set to the stand-by mode, wait a few sec-

onds.

 To change the display brightness (2 levels)

When the power is on, you can switch the display brightness by pressing the DIS-

PLAY button on the remote control.

 Volume control

Press the VOLUME (+ or -) button to increase or decrease the volume.

 Bass control

 Treble control

 Surround

Press the SURROUND button to enjoy music that seems to surround you. "SUR-

ROUND" will appear.

To cancel the surround mode, press the SURROUND button again.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

For example, CD function

Dimmer on Dimmer off

1Press the BASS/TREBLE button to select "BASS".

2Within 3 seconds, press the VOLUME (+ or -) button to adjust the bass.

1Press the BASS/TREBLE button to select "TREBLE".

2Within 3 seconds, press the VOLUME (+ or -) button to adjust the treble.

SURROUND indicator "SURROUND" will go out.

21 39 400

.....