Operation Manual, User's Manual

7-69
SETTING MODE►SYSTEM SETTINGS
Internet Fax Settings
Settings related to the image send function (Internet fax, Direct SMTP, etc.) can be configured.
Condition Settings
Configures the default settings for Internet fax.
Resolution Setting
Apply the Resolution Set when Stored
You can apply the resolution setting that was set when the file was saved to transmission of the file.
Resolution Setting
Set the resolution used for file transmission.
Half Tone
Enable half-tones.
Initial File Format Setting
File Type
This is used to set the file type for Internet fax transmission.
The following settings can be configured.
• TIFF-S
• TIFF-F
If one of the following functions is set, the image will be sent in TIFF-F format even if TIFF-S is set.
• Mixed Size Orig.
• Dual Page Scan
• Book Divide
• Card Shot
•N-Up
Compression Mode
This is used to set the compression mode for Internet fax transmission.
The following settings can be configured.
•MH (G3)
• MMR (G4)
Auto Wake Up Print
When the [Power] button is "Off" (but the main power switch is "On") and an Internet fax is received, this function
activates the machine and prints the fax.
When this function is disabled, received Internet faxes are not printed until the ([Power] button) is switched "On".
[MMR (G4)] cannot be selected when [File Type] is set to [TIFF-S].