Operation Manual, User's Manual
Table Of Contents
1-144
BEFORE USING THE MACHINEâ–ºPERIPHERAL DEVICES
PUNCH MODULE
The punch module can be installed on an inner finisher, finisher or saddle stitch finisher to punch holes in paper to be
output.
DISCARDING PUNCH WASTE
Punch waste from punched holes is collected in the punch waste box.
Follow the operation procedure to replace punch waste.
Inner finisher installed
1
Open the finisher front cover.
2
While pressing the lever over to the
left, slide the finisher to the left until it
stops.
3
Grasp the punch waste box handle,
gently pull out the box, and discard the
punch waste.