Operation Manual, User's Manual

4-84
FACSIMILE►OTHERS FUNCTION
This is a single transmission operation, and therefore originals cannot be scanned in succession from both the
document feeder and the document glass.
2
Enter the destination fax number.
• Entering a destination number using the numeric keys ►page 4-12
• Retrieving a destination from an address book ►page 4-14
• Using a search number to retrieve a destination ►page 4-17
• Retrieving a destination from a global address book ►page 4-18
• Using a transmission log to resend ►page 4-20
3
Tap the [Others] key, and tap the [Own Name Select] key.
4
Tap the sender information key to
specify the sender information.
After the settings are completed, tap and [Back] keys in
sequence.
To cancel the sender information setting:
Tap the [Clear] key.
5
Tap the [Start] key to start scanning of the original.
• If you inserted the original pages in the document feeder tray, all pages are scanned.
• A beep will sound to indicate that scanning and transmission have ended.
• When you place the original on the document glass, scan each page one at a time.
• When scanning finishes, place the next original and tap the [Start] key. Repeat until all pages have been scanned and
then tap the [Read-End] key.
A beep will sound to indicate that transmission has ended.
You can tap the [Preview] key to check a preview of the image before sending a fax. For more information, see
"CHECKING THE IMAGE TO BE T
RANSMITTED (page 4-29)". However, settings for this function cannot be changed
in the preview screen.
Back
Clear
Others
reception memory
Speaker
Start
Own Name
Select
AAA AAA
BBB BBB
CCC CCC
CA
Preview
100%