Operation Manual

Contents
1. Part Names
2. Basic Operation
3. Menu Operation
4. USB Media
5. Connecting Other
Devices
1. Connecting 8K Output-
compatible
Device/Quad-screen
display（4K or less)
5. Connecting 4K Output-
compatible Device
7. Viewing HDR Video
(INPUT1, INPUT7,
INPUT8)
9. Using the HDMI CEC
11. Connecting Recorder,
Player, etc.
21. Connecting Audio
Device
22. Connecting PC
6. Operating the Monitor
Using a PC (IP control)
7. Troubleshooting
＞
＜
Connecting Other Devices
Viewing HDR Video (INPUT1, INPUT7, INPUT8)
Adjusting an HDR video to be either brightness-oriented or tone-oriented.
1. Press MENU to display the Menu, use the / / / to select "Setup", and then press ENTER
2. Press / / / to select " (Picture)" - "Advanced", and press ENTER
3. Press / to select "Dynamic range expansion setting", and press ENTER
4. Make adjustments using the / button
• The video will be brightness-oriented if it is set to a larger value. The video will be tone-oriented if it is
set to a smaller value.
NOTE
• This selection is only available during the input of HDR signal.
• When HDR video contents are input, the "HDR" icon is displayed on the screen.
5-8
5/27/2020 Sharp operation manual